avrdude: Version 5.11svn-20111019, compiled on Feb 22 2012 at 21:21:50 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch System wide configuration file is "/usr/local/etc/avrdude.conf" User configuration file is "/home/marian/.avrduderc" User configuration file does not exist or is not a regular file, skipping Using Port : usb Using Programmer : usbasp AVR Part : ATMEGA8 Chip Erase delay : 10000 us PAGEL : PD7 BS2 : PC2 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 4 20 128 0 no 512 4 0 9000 9000 0xff 0xff flash 33 10 64 0 yes 8192 64 128 4500 4500 0xff 0x00 lfuse 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00 lock 0 0 0 0 no 1 0 0 2000 2000 0x00 0x00 calibration 0 0 0 0 no 4 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : usbasp Description : USBasp, http://www.fischl.de/usbasp/ avrdude: auto set sck period (because given equals null) avrdude: warning: cannot set sck period. please check for usbasp firmware update. avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.01s avrdude: Device signature = 0x1e9307 avrdude: safemode: lfuse reads as FF avrdude: safemode: hfuse reads as C9 avrdude: reading flash memory: Reading | ################################################## | 100% 1.83s avrdude: writing output file "~/Programy/AVR/LED/Release/LED1.hex" avrdude: error opening ~/Programy/AVR/LED/Release/LED1.hex: No such file or directory avrdude: output file ~/Programy/AVR/LED/Release/LED1.hex auto detected as invalid format avrdude: can't open output file ~/Programy/AVR/LED/Release/LED1.hex: No such file or directory avrdude: write to file '~/Programy/AVR/LED/Release/LED1.hex' failed avrdude: safemode: lfuse reads as FF avrdude: safemode: hfuse reads as C9 avrdude: safemode: Fuses OK avrdude done. Thank you.